Seattle Public Utilities
Seattle's inventory says the service lines are not lead
Seattle's 2024 water quality report says there are no known lead service lines. The map shows copper, plastic, or galvanized on the utility side, and non-lead on the private side. A free lead test is limited to utility-discount customers.
Last verified 2026-11-21 against the utility, state, or EPA pages linked at the bottom. Figures move. The official page wins if this one is behind.
Click the dark red line and the light red line
Seattle Public Utilities' service map asks you to zoom in until the lines draw. The dark red segment is the part SPU maintains, generally from the main to a few feet past the meter. The pop-up can show copper, plastic, or galvanized, plus the size and the year it was installed. The light red segment is on private property. SPU says the private-side materials it has recorded are copper, iron, or plastic, and that those pipes are categorized non-lead.
The map does not publish a count of lead lines, galvanized-requiring-replacement lines, or unknown lines. We are not filling that in from a third-party dashboard. Questions about a specific line go to (206) 684-5800.
Enter the address and zoom in until the lines appear. The dark red segment is the part SPU maintains, generally from the main to a few feet past the meter, and the pop-up can show copper, plastic, or galvanized, plus size and install year. The light red segment is the private side. SPU says private-side materials it has recorded are copper, iron, or plastic, and that those pipes are categorized non-lead.
No known lead service line is not the same as no lead in the house
The 2024 drinking water quality report says Seattle's source water has no detectable lead, and that there are no known lead service lines in the distribution system. It also says a small number of homes and buildings may have lead connections. A connection is a fitting, not the service line. The report treats them as different objects, and so does this page.
The same report gives the 2022 lead monitoring result: a 90th percentile of 2.8 parts per billion, with none of the 50 homes over the 15 parts per billion action level. Copper's 90th percentile was 0.12 parts per million, also with none of 50 over the action level. SPU says it has met the Lead and Copper Rule since 2003 and qualifies for reduced monitoring, 50 homes once every three years. The lead page on seattle.gov walks through the same rule and says the utility's lab is not set up to test a high volume of residential samples.
The 2024 drinking water quality report says there are no known lead service lines in Seattle's distribution system, and that a small number of homes and buildings may have lead connections. The map does not publish a count of lead, galvanized-requiring-replacement, or unknown lines. We did not turn 'no known lead service lines' into a zero for every category.
The free test is for the utility discount program
Customers enrolled in the City of Seattle Utility Discount Program can ask for a free lead test by calling the Water Quality Lab at (206) 615-0827. That number is not a general testing line. Everyone else uses a certified laboratory. SPU says drinking water is a smaller source of lead exposure than paint, soil, and food, which is the right context in a city whose service-line inventory is not a lead inventory.
There is no lead-service-line replacement signup on these pages, because the finding they publish is that there is no known lead service line to put in a queue. A galvanized segment on the map is galvanized. If you need it judged against the federal galvanized-requiring-replacement category, ask SPU. The map page we read does not apply that label.
Free lead testing for customers enrolled in the City of Seattle Utility Discount Program, through SPU's Water Quality Lab at (206) 615-0827. Other customers use a certified lab. SPU says its lab cannot take a large volume of residential samples.
The federal replacement mandate has little to bite on here
EPA still required the inventory, and the initial inventory was due October 16, 2024. The baseline update is due November 1, 2027. The 10-year replacement duty applies to lead and galvanized-requiring-replacement lines under the system's control. SPU's report says it has no known lead service lines. We are not declaring the system exempt. We are saying the utility has not published a replacement program, a customer cost share, or a count of lines left to replace, and those sections would be fiction if we wrote them.
Other Washington systems are a different story. Spokane has discussed loans for private galvanized lines. We did not re-verify Spokane's current terms on this pass, so this page does not describe them. If your bill is not from Seattle Public Utilities, start with the utility named on the bill.
Dates in this section follow EPA's October 2024 fact sheets, which are listed on the method page: an initial inventory on October 16, 2024, Lead and Copper Rule Improvements compliance on November 1, 2027, and full replacement within 10 years with the first rate check on December 31, 2030. A longer schedule is available only if a 10-year pace would mean more than 39 replacements per 1,000 service connections a year, and the state still has to call that pace the fastest feasible. The American Water Works Association sued over the rule (D.C. Circuit No. 24-1376). NRDC, which is in the case, says argument was held on September 30, 2026, EPA defended the rule, and a decision is likely months after argument. The dates on this page are the ones EPA published in October 2024.
If your water bill is from Seattle Public Utilities
- Open the service line map, zoom in, and click both the dark red and the light red segments.
- Read a galvanized result as galvanized, not as lead. Ask SPU if you need the line interpreted against the galvanized-requiring-replacement category. The map page we checked does not apply that label.
- If you are on the Utility Discount Program and want a lead test, call (206) 615-0827. If you are not, use a certified lab. The water quality lab's number is not a general testing desk.
- Questions about the service line itself go to Seattle Public Utilities at (206) 684-5800.
Open the lookup tool Compare what customers pay Print the next steps
Guides to read with the Seattle record
- How to tell if your water service line is lead
- How to check your utility's service line inventory for your address
- Water filters for lead while you wait for replacement
- Lead in water vs lead paint: different problems
Other utilities checked on 2026-11-21: Colorado, Illinois, Wisconsin, New York, Pennsylvania, Michigan, Rhode Island, Minnesota, Louisiana, Florida, Ohio, Maryland.
Sources
- Seattle Public Utilities, learn about your water service line (map)
- Seattle Public Utilities, 2024 Drinking Water Quality Report (PDF)
- Seattle Public Utilities, lead in water
- EPA fact sheet: 2021 LCRR requirements retained, and LCRI compliance dates (October 2024)
- EPA fact sheet: calculating service line replacements (October 2024)
- EPA fact sheet: service-line inventory and replacement (October 2024)
- EPA FAQ for states and public water systems on the final LCRI (October 2024)
- NRDC case page: American Water Works Association v. EPA, updated September 30, 2026