Filters while waiting for lead pipe replacement
Last updated
Which years of the wait are on you, and which events require the water system to hand over a certified pitcher, cartridges, and flushing steps.
A certified filter is a way to cut what you swallow while a lead service line is still in service. It is not a substitute for taking the pipe out, and the federal rule does not mail a free pitcher to every lead-line address for the whole wait. The wait can stretch on for years. The replacement timeline explains the program-year clock that starts November 1, 2027. This page is about water use during those years: what you do on an ordinary Tuesday, and the narrower events that put a filter in the utility’s hands instead of yours.
Shopping details, model-by-model, live in Water filters for lead while you wait for replacement. What follows is the schedule problem, not a second product list.
The long stretch when the pitcher is yours
Knowing the service line is lead, galvanized requiring replacement, or unknown does not, by itself, trigger a federal duty to deliver a filter to the door. The duties that do require a device are tied to specific events, described below, and the main compliance date for those Lead and Copper Rule Improvements provisions is November 1, 2027. Until an event happens, the steps CDC publishes for households are the ones that apply at the kitchen sink. (epa.gov)
CDC’s drinking-water page says people can lower exposure by drinking or cooking only with tap water that has passed through a point-of-use filter certified by an independent testing organization to NSF/ANSI standard 53 for lead removal and NSF/ANSI standard 42 for particulate removal. Households with lead service lines are specifically told to use that kind of filter for water used for drinking or cooking. Use the cold tap. Water that comes out warm or hot can carry more lead, and boiling does not reduce the amount of lead in the water. (cdc.gov)
EPA’s consumer tool is narrower than “any filter with the word lead on the box.” It points to point-of-use and pitcher filters that an accredited third-party certification body has evaluated for lead reduction to 5 parts per billion or less and for Class I particulate reduction, against both NSF/ANSI 53 and NSF/ANSI 42. A certification is for a specific device and replacement element. If the cartridge in the pitcher is a different model than the one that was evaluated, you are no longer using the device the listing describes. Follow the rated capacity and the replacement interval printed for that model. This site does not name brands or quote a universal number of months, because those figures belong to the certified listing, not to a national average. (epa.gov)
An illustrative kitchen, not a real household: coffee, soup, ice, and infant formula all count as water you swallow. If any of those are filled from an unfiltered bathroom tap, a refrigerator dispenser that was never certified for lead, or a kettle of boiled tap water, the pitcher on the counter is not covering the exposure. CDC also notes that infants who drink formula mixed with lead-contaminated tap water can be at higher risk because of how much water they take in relative to body size. The federal public-education text tells systems to warn against using hot tap water to prepare baby formula. (cdc.gov)
Bottled water that an independent organization has certified is another CDC option, and CDC says it can virtually eliminate exposure from water. CDC also says it may not be the most cost-effective choice for long-term use. On a wait measured in years, that cost point matters. A certified point-of-use filter, maintained on the manufacturer’s schedule, is the approach CDC describes for ongoing drinking and cooking. (cdc.gov)
Skin contact is a different question. CDC says bathing and showering should be safe for adults and children because human skin does not absorb lead in water. The filter task is about what is swallowed or cooked, not about every faucet in the house. (cdc.gov)
A filter does not change the inventory. The annual notice continues until the entire connection is no longer lead, galvanized requiring replacement, or unknown. Using a pitcher faithfully for three years does not move your address off that list. (law.cornell.edu)
When street work, not replacement, is what triggers a utility pitcher
40 CFR 141.85(f) covers disturbances the water system causes to a lead, galvanized-requiring-replacement, or lead-status-unknown service line. A disturbance includes shutting off or bypassing water to a line or a group of lines, operating a valve on a service line or meter setter, reconnecting a line to the main, or other physical action or vibration that could knock scale loose and release particulate lead. The system must give people at the connection public-education material on health effects and exposure-reduction steps, contact information, and instructions for a flushing procedure aimed at particulate lead. (law.cornell.edu)
A device is added only for a subset of those disturbances. If the disturbance comes from replacing an inline water meter, a water meter setter, or a connector, or from replacing a water main in a way that physically cuts the service line, the system must also provide a pitcher or point-of-use device certified by an ANSI-accredited certifier to reduce lead, instructions for using it, and six months of replacement cartridges. (law.cornell.edu)
Timing is tight, and it is different for the person at the tap and for an off-site account holder. People served at the connection must get the disturbance information before a line that was shut off or bypassed is returned to service. If the water was never shut off, the deadline is as soon as possible and no later than 24 hours after the disturbance. A customer who is not a person served at the connection, the example in the rule is an owner renting the property out, must get the paragraph (f)(1) information no later than 30 days after the disturbance. (law.cornell.edu)
Full or partial replacement of a lead or galvanized-requiring-replacement line is not a “disturbance” under that paragraph. It has its own protocol, below. (law.cornell.edu)
If a meter crew or a main project shows up years before your replacement year, ask whether your inventory category is lead, galvanized requiring replacement, or unknown, and whether this visit is one of the disturbance types that includes a pitcher and six months of cartridges. A door hanger about “brief water shutoff” may not answer that question.
Replacement day, and a separate exceedance rule
When the system does replace a lead or galvanized-requiring-replacement line, in whole or in part, 40 CFR 141.84(h) requires notice, written flushing instructions for service lines and premise plumbing, and, before the affected line goes back into service, a pitcher or point-of-use device certified by an ANSI-accredited certifier to reduce lead, six months of replacement cartridges, and instructions. If that one service line feeds more than one residence or non-residential unit, the device, the six months of cartridges, and the instructions go to every residential and non-residential unit. The system must also offer a follow-up tap sample between three and six months after the replacement. For a partial replacement, that sample is a first-and-fifth-liter pair. EPA’s October 2024 inventory fact sheet describes the same package: education, flushing instructions, and the certified device with six months of cartridges, delivered before the line is returned to service. (law.cornell.edu)
Keep using whatever the utility hands you for the period the instructions cover, even if the trench is already filled. EPA notes that replacement work can break corrosion scale and temporarily raise lead in the water. CDC says a person’s risk can increase while the work is going on and for up to six months after it is finished, including when the main or the service line is being replaced. The six months of cartridges line up with that window. They are not a hint that the new pipe is still lead. (cdc.gov)
There is a third, system-wide filter duty that has nothing to do with your personal replacement date. If a water system exceeds the lead action level at least three times in a rolling five-year period, 40 CFR 141.85(j) says it must make pitcher filters or point-of-use devices certified by an ANSI-accredited certifier to reduce lead available to all consumers, with six months of replacement cartridges and instructions, no later than 60 days after the tap-sampling period of the third exceedance. It must keep making cartridges available until it no longer meets that three-in-five test, or until the state allows an earlier stop after two consecutive monitoring periods at or below the action level and other lead-reducing actions. The first rolling five-year period begins on the LCRI compliance date. After two exceedances in five years, the system must submit a filter plan describing how people can actually obtain the devices and how barriers will be handled. “Make available” can mean a pickup site or delivery on request. It is not the same sentence as “hand a pitcher to this address before the water comes back on.” (law.cornell.edu)
A practical split for the years in between
| Situation | Who supplies the certified device |
|---|---|
| Ordinary months while the line is still lead, galvanized requiring replacement, or unknown, and no disturbance or replacement has occurred | The household, following CDC’s point-of-use guidance and EPA’s certification tool |
| Meter, meter setter, connector, or a main job that cuts the service line | The water system, for persons at the connection, with six months of cartridges |
| Full or partial replacement of a lead or galvanized-requiring-replacement line | The water system, before the line returns to service, including every unit on a shared line |
| Third lead action-level exceedance in a rolling five-year period after the LCRI compliance date | The water system, making devices available to all consumers under its filter plan |
Local programs sometimes hand out pitchers earlier or more widely than these federal triggers. That is a local choice. Ask your utility what it offers now, and keep the answer next to the inventory letter. A city program can be more protective than the federal minimum. It cannot be assumed from a neighboring city’s website.
If a cartridge date passes during the ordinary wait, replace it with the element named for that certified model. An expired cartridge is a gap you can see. Lead in the water is not. CDC says you cannot see, taste, or smell it. (cdc.gov)
Health questions belong with a clinician. CDC says there is no safe blood lead level that has been identified for young children, that a blood test is how exposure is determined, and that most children and adults who are exposed have no symptoms. A filter log is not a blood-lead result. If you think a child has been exposed, contact the child’s health care provider. (cdc.gov)
This page is general information, not a product endorsement and not medical or engineering advice. Confirm certification against EPA’s tool or the certifier’s listing for the exact model, and follow any written instructions your water system gives for your address when those instructions are stricter.
Sources
- About Lead in Drinking Water | CDC
- Consumer tool for point-of-use and pitcher filters certified to reduce lead | US EPA
- 40 CFR 141.85, public education and supplemental monitoring
- 40 CFR 141.84, service line inventory and replacement requirements
- EPA fact sheet for states and public water systems on the final LCRI (October 2024)
- EPA fact sheet on service-line inventory and replacement requirements (October 2024)